KTM ‘Group’ 65cc 2024-on Complete Rebuild Kit – TSP

This TSP complete rebuild kit will suit KTM65SX / Husky TC65 / Gas Gas MC65 models from 2024-on.  Image is for illustration purposes only. You will receive the correct parts for your model.

It includes:

• Piston kit in the size of your choice (A or B). Piston kit includes rings, pin, circlips and a high quality cast piston with anti-friction coating. These pistons are made in Italy and are the best available. This piston is a custom design for TSP with proven results over the OEM design.
• Complete gasket and seal kit. Includes a selection of base gaskets, powervalve cover gaskets and O rings, plus all engine seals.
• Pro X con rod kit (includes little end bearing). Made in Japan.
• Left and Right main bearings. Usually SKF, NTN or KOYO

Piston sizing: ideally you should measure your bore with a dial gauge to work out the correct piston sizing. If you cannot do this then a rough rule of thumb is use an A size under 40 hours of engine run time and use a B size over 40 hours of engine run time. Its ALWAYS better to have a bit too much clearance than not enough, so if in doubt use an A size.

Additional information