COVID19: WE ARE CURRENTLY OPEN FOR BUSINESS AND TRADING NORMALLY!
$0.00 / 0 items
0
0
KTM150SX/TPI and Husky TC/TPI150 & 2016-On Complete Rebuild Kit – TSP

$628.80

KTM150SX/TPI and Husky TC/TPI150 & 2016-On Complete Rebuild Kit – TSP

$628.80

piston kit
KTM 150 SX/TPI 16-On Piston PC2773
Piston Size
KTM125/150 Seal Kit 16on 669SR

In stock

complete gasket set
KTM125/150 F.Gasket 16on 669FL

In stock

connecting rod kit
KTM125-150 Rod 16-on 03.6226

In stock

main bearings
Main Bearing KTM125-200 NJ206

In stock

main bearings
Main Bearing KTM125-200 6305C3

In stock

In stock

Quantity

This TSP complete  rebuild kit will suit KTM150SX/150TPI and Husky TC150/150TPI models from 2016-On . Image shows 2016-on 125SX parts and is for display purposes only.

It includes:

  • Piston kit in the size of your choice (A or B). Piston kit includes rings, pin, circlips and a high quality cast piston with anti-friction coating. These pistons are made in Italy and are THE BEST available.
  • Complete gasket kit. Made in Italy and packed especially for TSP. Includes a selection of base gaskets, powervalve cover gaskets, copper washers and O rings… all O rings are the correct size and made from the correct material, unlike the cheaper aftermarket kits.
  • Pro X con rod kit (includes little end bearing). Made in Japan.
  • Left and Right main bearings. Usually NTN or KOYO. Made in Japan.
  • Complete engine seal kit. Made in Italy and packed especially for TSP. Includes all oil seals, crank seals, water pump seals, etc.

TSP rebuild kits are put together by TSP using parts sourced direct from OEM manufacturers in Japan and Europe. The parts we select are THE BEST available for each make/model and many are the exact same parts as the genuine items. All TSP rebuild kits are kept in stock at TSP.

Piston sizing: ideally you should measure your bore with a dial gauge to work out the correct piston sizing. If you cannot do this then a rough rule of thumb is use an A size under 100 hours of engine run time and use a B size over 100 hours of engine run time. Its ALWAYS better to have a bit too much clearance than not enough, so if in doubt use an A size.

Additional information

Weight2.5 kg
Piston Size

,