KTM85SX and Husky TC85 2018-on Top End Rebuild Kit – TSP

This TSP top end rebuild kit will suit KTM85SX and Husky TC85 models from 2018 onwards. It will also suit the Gas Gas MC85 2021-on models. Image shows the actual piston you will receive, however gaskets are slightly different to the image. You will receive the correct parts for your make/model.

It includes:

• Piston kit in the size of your choice (A or B). Piston kit includes rings, pin, circlips and a high quality cast piston with anti-friction coating. These pistons are made by Meteor in Italy and are THE BEST available. Occasionally we will need to supply a different brand if we are out of stock. In this case we will contact you and usually offer Wossner or Pro X as a replacement.
• Top end gasket kit. Made in Italy and packed especially for TSP. Includes a selection of base gaskets to suit any TSP head or stock head, powervalve cover gaskets and O rings… all O rings are the correct size and made from the correct material, unlike the cheaper aftermarket kits.
• Little end bearing. Made in Japan.

TSP Select rebuild kits are put together by TSP using parts sourced direct from OEM manufacturers in Japan and Europe. The parts we select are THE BEST available for each make/model and many are the exact same parts as the genuine items. All TSP Select rebuild kits are kept in stock at TSP.

Piston sizing: ideally you should measure your bore with a dial gauge to work out the correct piston sizing. If you cannot do this then a rough rule of thumb is use an A size under 60 hours of engine run time and use a B size over 60 hours of engine run time. Its ALWAYS better to have a bit too much clearance than not enough, so if in doubt use an A size.

Additional information