$0.00 / 0 items
KTM125SX and Husky TC125 2016-On Top End Rebuild Kit – TSP


KTM125SX and Husky TC125 2016-On Top End Rebuild Kit – TSP


piston kit
KTM125 Piston 01-on PC2472
Piston Size
top end gasket set
KTM125/150 Top Gasket 16on 669TP

Out of stock

little end bearing
KTM125/RM125 LEB 98-on 21.3206

In stock

Out of stock. If any items are backordered, your order will be sent all at once when items have arrived in stock


This TSP top end rebuild kit will suit KTM125SX and Husky TC125 models from 2016-On. Image shows the parts you will receive.

It includes:

  • Piston kit in the size of your choice (A or B). Piston kit includes rings, pin, circlips and a high quality cast piston with anti-friction coating. These pistons are made by Meteor in Italy and are THE BEST available. Occasionally we will need to supply a different brand if we are out of stock. In this case we will contact you and usually offer Wossner or Pro X as a replacement.
  • Top end gasket kit. Made in Italy and packed especially for TSP. Includes a selection of base gaskets, powervalve cover gaskets, copper washers and O rings… all O rings are the correct size and made from the correct material, unlike the cheaper aftermarket kits.
  • Pro X little end bearing. Made in Japan.

TSP rebuild kits are put together by TSP using parts sourced direct from OEM manufacturers in Japan and Europe. The parts we select are THE BEST available for each make/model and many are the exact same parts as the genuine items. All TSP rebuild kits are kept in stock at TSP.

Piston sizing: ideally you should measure your bore with a dial gauge to work out the correct piston sizing. If you cannot do this then a rough rule of thumb is use an A size under 100 hours of engine run time and use a B size over 100 hours of engine run time. Its ALWAYS better to have a bit too much clearance than not enough, so if in doubt use an A size.

Additional information

Weight.5 kg
Piston Size