ITEMS ORDERED IN STOCK ARE SENT EVERY MONDAY, WEDNESDAY AND THURSDAY AT 12PM
$0.00 / 0 items
0
0
Honda CR250 2005-2007 Top End Rebuild Kit – TSP

$240.27 ex GST

Honda CR250 2005-2007 Top End Rebuild Kit – TSP

$240.27 ex GST

piston kit
CR250 Piston 05-07 PC2384
Piston Size
top end gasket set
CR250 Top Gasket 02-07 300TP

In stock

little end bearing
CR250 & Sherco 300 LEB 21.1316

In stock

In stock

Quantity

This TSP top end rebuild kit will suit Honda CR250 models from 2005-2007. Image is for illustration purposes only. You will receive the correct parts for your make/model.

It includes:

  • Piston kit in the size of your choice (A or B). Piston kit includes rings, pin, circlips and a high quality cast piston with anti-friction coating. These pistons are made by Meteor in Italy and are THE BEST available. Occasionally we will need to supply a different brand if we are out of stock. In this case we will contact you and usually offer Wossner or Pro X as a replacement.
  • Top end gasket kit. Made in Italy and packed especially for TSP. Includes a selection of base gaskets, powervalve cover gaskets, copper washers and O rings… all O rings are the correct size and made from the correct material, unlike the cheaper aftermarket kits.
  • Pro X little end bearing

TSP rebuild kits are put together by TSP using parts sourced direct from OEM manufacturers in Japan and Europe. The parts we select are THE BEST available for each make/model and many are the exact same parts as the genuine items. All TSP rebuild kits are kept in stock at TSP.

Piston sizing: ideally you should measure your bore with a dial gauge to work out the correct piston sizing. If you cannot do this then a rough rule of thumb is use an A size under 100 hours of engine run time and use a B size over 100 hours of engine run time. Its ALWAYS better to have a bit too much clearance than not enough, so if in doubt use an A size.

 

 

Additional information

Weight.5 kg
Piston Size

,