ITEMS ORDERED IN STOCK ARE SENT EVERY MONDAY, WEDNESDAY AND THURSDAY AT 12PM
$679.95 / 1 item
1
1
TPI Power Kit – suits 2020-2023 KTM 150TPI and Husky TE150i

$742.64 ex GST

TPI Power Kit – suits 2020-2023 KTM 150TPI and Husky TE150i

$742.64 ex GST

ECU Re-flash for 150TPI - Send us your ECU after processing your order. We require your ECU for roughly 3-4 working days
Model Year
KTM150TPI and Husky TE150i 2020-2023 Cylinder Head - TPI models

In stock

KTM/Husky/GasGas Idle Bolt & Spring

In stock

In stock

Below items are additional extras:
Quantity

*** For high-revving applications, please see our 150TPI over-rev tune. If you want more bottom-mid power gains, this is the correct kit for you ***

Please note – If you add an injector relocation kit to your order, we will be sure to tune your ECU to suit the injector relocation kit when you send it in

This package will transform the power delivery of your TPI… it includes the following:

  • a new  TSP billet cylinder head. We currently offer a single compression ratio which is higher than stock but still very safe for 98 RON pump fuel (approx 91-92 in the USA).
  • reflashing of your STOCK ECU with improved fuel, oil and ignition maps developed by TSP…We modify both Map 1 and Map 2, with a more noticeable difference between the maps compared to the stock maps. Both maps have more oil everywhere compared to stock. Map 1 is the fully tuned map delivering maximum performance. Map 2 has less ignition advance and more fuel than Map 1 and is softer everywhere. Map 2 is the ‘safe’ map we suggest using for prolonged high speed riding, deep sand, or if you want to temporarily reduce power in very technical terrain.
  • 50mm bolt and spring necessary to do the ‘idle screw mod’. Not always necessary to install but we supply it just in case.

This package makes a huge difference to the 150TPI and offers the following gains over a stock bike:

  • much more torque at low/mid revs, where you need it most, with a nice increase in power higher up in the rev range as well.
  • drastically improved 0-1/2 throttle performance
  • more oil than the stock maps for improved reliability… the stock 20 model maps gave a very low oil volume. This was increased on the 21 stock maps due to a high number of top end seizures in the early models. Our oil maps offer a greater volume than the stock 21 maps.
  • 2 ignition maps: hard and soft. The stock map switch works like normal to select between the customised maps.
  • much smoother power deliver at part throttle… the part throttle splutter is almost completely gone.
  • much less ‘pipe bang’… this is the annoying “dang, dang, dang” noise the engine makes on deceleration. Its generally harmless but very annoying and makes the stock 18/19 TPI unpleasant to ride at times.
  • safer air/fuel ratios at high rpm and large throttle openings so the engine is safer during prolonged high speed running
  • better throttle response

Our 150TPI kit increases power throughout the rev range, making approximately 2hp more up top and 5 hp more through the midrange compared to a stock bike,  making it a weapon offroad.

In order to change the stock ECU data we have spent hundreds of hours developing our own process for accessing, changing and reloading the ECU data. TSP was the first to develop a tuned package for the TPI bikes and we have years of experience testing and tuning fuel injected 2 strokes prior to the release of the TPIs in 2018.

The stock ECU will still connect to the KTM/Husky diagnostic tool and the dealer can still perform all normal service tasks… in fact, they wont be aware that the ignition and fuel data has been modified. All other ECU features work normally, including oil injection, fan and warning lights. There are no issues with hard starting and no need to tune via apps or software… just install and ride!

We supply fitting instruction plus recommended settings for the air screw and powervalve preload.

 

 

HOW TO ORDER:

  • Purchase the TPI Power Kit by placing an online order, select your desired combustion chamber and payment method
  • Send us your stock ECU with a copy of the order confirmation you receive via email
  • Once we receive your ECU we will reflash it and return it with the head, and idle bolt.

 

Read our Shipping page HERE to find out more about return shipping times and prices.

Additional information

Weight1 kg