ITEMS ORDERED IN STOCK ARE SENT EVERY MONDAY, WEDNESDAY AND THURSDAY AT 12PM
$0.00 / 0 items
0
0
KTM144/150SX and Husky TC150 2007-2015, KTM144/150EXC 2007-2016 Top End Rebuild Kit – TSP

$251.85

KTM144/150SX and Husky TC150 2007-2015, KTM144/150EXC 2007-2016 Top End Rebuild Kit – TSP

$251.85

piston kit
KTM 144 & 150 Piston 07-15
Piston Size
top end gasket set
KTM144/150 Top Gasket 0815 005TP

Out of stock. If any items are backordered, your order will be sent all at once when items have arrived in stock

little end bearing
KTM125/RM125 LEB 98-on 21.3206

In stock

Out of stock. If any items are backordered, your order will be sent all at once when items have arrived in stock

Quantity

This TSP top end rebuild kit will suit KTM144/150SX and Husky TC150 models from 2001-2015 and KTM144/150EXC models from 2001-2016. Image shows 2016-on 125 parts and is an example of the parts we supply. You will receive the correct parts for your make/model.

It includes:

  • Piston kit in the size of your choice (A or B). Piston kit includes rings, pin, circlips and a high quality cast piston with anti-friction coating. These pistons are made by Meteor in Italy and are THE BEST available. Occasionally we will need to supply a different brand if we are out of stock. In this case we will contact you and usually offer Wossner or Pro X as a replacement.
  • Top end gasket kit. Made in Italy and packed especially for TSP. Includes a selection of base gaskets, powervalve cover gaskets and O rings… all O rings are the correct size and made from the correct material, unlike the cheaper aftermarket kits.
  • Little end bearing. Made in Japan.

TSP Select rebuild kits are put together by TSP using parts sourced direct from OEM manufacturers in Japan and Europe. The parts we select are THE BEST available for each make/model and many are the exact same parts as the genuine items. All TSP Select rebuild kits are kept in stock at TSP.

Piston sizing: ideally you should measure your bore with a dial gauge to work out the correct piston sizing. If you cannot do this then a rough rule of thumb is use an A size under 60 hours of engine run time and use a B size over 60 hours of engine run time. Its ALWAYS better to have a bit too much clearance than not enough, so if in doubt use an A size.

Additional information

Weight.5 kg
Piston Size

,